Whilst millions of years, the present relief of the Earth was formed by the water into a shape that we can see today. Water is the most famouos "creative actor". Water needs only time and it will destroy anything unless we people, would not limit it.
Damages to buildings decreas the Nations' assets to a horrible extent with every year. For keeping-up the value of buildings and refurbish them, a steadily and very high investment in materials is required which means a very high burden to the families due to water-caused damages to buildings.
For the physical, chemical and biological processes resulting in damaging in buildings, water is needed, without exception. If buildings are prevented from water, these destroying processes can be ceased.
The damages to buildings caused by water, may impair the appearance of the buildings or cause damages to the building materials, and so, they may question a further existence of buildings.
At silicate-based building materials, the problems are caused by the porosity of materials: the larger is the porosity of a substance, the more water it will absorb.
The duty is hence to prevent the absorption of water into construction materials. Our environment is however, exposed not only to destroying impacts of water, but also to vandalism by human beings.
Our environment is more and more spoiled by wall paintings the "authors" of which "would not acknowledge either the Lord or human beings". These problems can be settled in many ways.
These problems can be settled in different ways, but the trouble is hidden in the fact of how one can meanwhile retain the air-passing capability of the building materials that of the "vapour diffusion",
Our product range the offers a wide range to jointly settle the problems above.
Thanks to its silicon content, it is organically binding into any kind of silicate-based building materials enabling to to work as oil- and water-repellent agent at the same time, whilst not changing the "breathing capability" construction materials.
Our slogan says: Use the "liquid umbrella", and flat/house can breath again.
Using of all of the members of the product range is very simple it will not require professional skills. The treatment (making hydro-phobic) can be done by dipping depending on the surface features with brush, teddy-roller or large-drop sprayer.
The substance shall be applied in two layers at least (except for the dipping) with a so called "wet-to-wet" procedure. in case of glued building materials, it is recommended to treat the surface following the pointing since in doing so, the pointing will also be protected against water.
Note! A test treatment shall be performed in any case!
The durability of the hydrophobic feature is provided for through the manufacturing processes used, active components, and a proper execution work. This is proven with a number of buildings and facilities all over the world.
The first test was made on a surface of slacked lime and mortar in Germany in 1954. This surface had not become wet not even in 1997 based on the results of the testing made with Karlsten's tubes.
One section of the reinforced concrete structure of the Munich Olimpic Village was impregnated in 1972 and the inspection & testing in 1995 had shown positive results.
The Capitolium Building in Washington and the huge Maoi monuments on the Eastern Islands, the Town Hall in Munich, Germany, or the Lloyd Bank's building in London are protected with silicon hydrophobiser but the huge Christ monument in Rio de Janeiro, Brazil, might also be mentioned, or even the whole Mayan Temple Town in Teotihuacan town.
The surface treated with aqua-stopwR, becomes water-repellent whilst the poreson the surface will not be clogged. The agent prevents water from entering even into smaller cracks.
Excellent for handling concrete, stone, brick and plastered surfaces in animal habitats (kennel, hutch, stable, etc.).
It's used to prevent urine absorption into the surface, which reduces the build up of stench, eliminates plaster peel off caused by urine and washing.
It's easier to remove droppings and food residues.
Prevents pathogens from settling down.
The water-repellent effect develops in 24-48 hours after the treatment.
The agent is bioactive neutral!
CAST STONE PROTECTOR
It's ideal for impregnating artificial surfaces.
Its active ingredient significantly reduces the capillary water absorption capacity of the building material but doesn't seal pores or capillaries.
Therefore, the change in the respiration of building materials is barely measurable or noticeable.
It's not suitable for make gypsum water-repellent.
Shouldn't be used for solvent sensitive materials (nikecell, hungarocell, bitumen, etc.)
Warning: The product contains solvent, therefore it can be used only in those closed rooms, which are intensively vented.
Smoking and open flames are prohibited during usage!
CLINKER PROTECTOR
It has been specially developed for clinker bricks.
The silicon penetrating even in the interior closed clinker tiles or bricks of slight porosity, which are in any case closed, will prevent bricks from changes in colour, florishing of limestone and damaging by frost.
Don't skip the point during the treatment.
Warning: The product contains solvent, therefore it can be used only in those closed rooms, which are intensively vented. Smoking and open flames are prohibited during usage!
CONCRETE STONE BALSAM
Concrete Stone Balsam is suitable for colour vitalizing and impregnating old and faded concrete stones.
With its usage faded stones recover their vibrant colors.
We can be also prevented from saltpetre and salt efflorences.
Teddy-rolls are prohibited because the surface may be stained!
The unabsorbed excess should be removed because the surface may become sticky and stained.
Warning: The product contains solvent, therefore it can be used only in those closed rooms, which are intensively vented.
Smoking and open flames are prohibited during usage!
CONCRETE STONE PROTECTOR
Ideal impregnating agent for all space cladding stones, tiles of cement (concrete).
With its usage we can prevent the surface from growth of algae, being discoloured, and from salt efflorescence.
Thanks to its special active agent contents, the colours of the stones would not tend to fade out since they are prevented from leaching and damages through ultraviolet (U.V.) rays.
It is recommended for impregnating space cladding stones via dipping before fitting them into the sand or gravel.
Warning: Smoking and open flames are prohibited during usage!
CONCRETE STONE PROTECTOR MAX
Oil- and water-repellent agent, which is excellent for protecting concrete stones.
The treated surfaces can be more easily cleaned from greasy, oily, painted, etc. contamination.
It's recommended for any location where stone can be exposed to oil contamination: garage, car park, grill oven and its surroundings, etc.
The effect of the substance is partially apparent after 24 hours, and fully apparent after 1 week.
It has been developed to protect grill ovens made of stone, artificial stone or concrete.
The treated grill oven becomes oil and water repellent, which makes it easy to clean and also protects against frost damage.
Fat and oil spillage spilt freshly, can easily be removed with a wiping cloth and more stubborn contaminants can be removed with a hot water high pressure washing device.
The treatment must be carried out in two layers at least.
If the water- and oil-repellent capacity of the surface decrease due to the frequent cleansing, repeat the treatment should be repeated.
MARBLE PROTECTOR
Ideal impregnation agent of marble and granite surfaces.
With its usage we can prevent water absorb into the surface so it will not getting stained or dirty.
Remove the unnecessary excess amount carefully with a soft cloth because drying on the direct surface causes stains.
Warning: The product contains solvent, therefore it can be used only in those closed rooms, which are intensively vented. Smoking and open flames are prohibited during usage!
POINTING PROTECTOR
Excellent agent to treat points.
Under its effect, no water will be absorbed through the points hence no dirt and/or mildew is formed.
The agent does not contain any solvents to other similar agents, so the excess material on the tiles doesn't cause stains.
The substance should be applied with brushes in compliance with the widths of the pointwork and in two layers at least (a procedure of wet layer to wet layer).
After completion of the work, rinse the tools with water.
This agent can also be used outdoors (e. g.: when cladding basements with stones, on terraces) in doing so, the points can be prevented from freezing up as well.
POINTING PROTECTOR MAX
Through its oil- and water-repellent active agents, Pointing Protector Max is excellently suitable for the treatment of points on surfaces exposed to oily and greasy contaminants (in living rooms, kitchens, dining rooms, garages, workshops, slaughterhouses, etc.)
Splashed-out soup, stew, red wine will not pollute or change the colours of the points between floor slabs and thin floor tiles, and they can easily be cleaned.
The agent is applied to the points in two layers at least using brushes.
The next layers should be applied to the surface before the previous paint layers would have been drying out.
The effect of the substance is partially apparent after 24 hours, and fully apparent after 1 week.
ROOFTOP CONCRETE ROOF
Excellent water repellent, even on highly alkaline surfaces such as concrete roof tiles.
Its special composition grants a conservation for concrete tiles for several decades.
Thanks to its special active agent content, no stains are formed on the concrete tiles, there are no contaminants and algae on it.
The water-repellent effect does not deteriorate greatly even despite of rapid rainfall after the application.
The agent significantly reduces the capillary water absorption capacity of the building material but doesn't seal the pores or capillaries.
ROOFTOP TILE
Thanks to its special active agent content, it grants years of protection for burnt, unglazed roof tiles.
After treatment, there's no stain, contamination or growth of algae on the tiles.
The treatment should be carried out by dipping and after a short time of drying, tiles can be fitted into their positions.
For subsequent treatment the tiles should thoroughly be cleaned, and after drying, the treatment can be carried out.
The agent should not be diluted!
STONE BALSAM
Wonderfully brings out the pattern of dark-coloured stones.
When using it, one can reach an effect as if the surface of the stones would always be watery, it deepens the colours of the stones, and points out the tiniest patterns of the stones.
When applied, the surface of the stones becomes water-repellent, and so, the surface is protected against damages caused by water.
The substance shall be applied to the surface in two layers at least without dilution.
Repeated treatment cycles show an even more watery effect. A test treatment shall be carried out in any case.
Warning: The product contains solvent, therefore it can be used only in those closed rooms, which are intensively vented.
Smoking and open flames are prohibited during usage!
STONE PROTECTOR
It's especially suitable to make indoor or outdoor stones and brick covers water-repellent.
It is recommended for protecting freestones, (not compact) limestones, porphyry, quartzite, solnhoffen and other natural stones as well as cutted and broken bricks.
It will not close up the pores of stones, however, it grants a first class protection against the damaging impacts of the water to our stones.
Treatment should be repeated every 4-5 years.
When using the product, you shall observe the safety instructions because the agent is a strong alkaline hence it has a corrosive impact.
STONE PROTECTOR MAX
Due to its special active agent which meets with the requirements of the XXIth century, makes the treated surfaces of mineral substrates not only water-repellent (hydrophobic), but also oil-repellent (oleophobic).
Oily and greasy contaminants, poster residues on surfaces treated with the agent can easily be removed.
Floors, points and window-sills made from stone, artifical stone, unglazed ceramic tiles do not stain, dirt can be easily removed from the surface.
For the cleaning a high pressure warm water rinsing is recommended.
The effect of the substance is partially apparent after 24 hours, and fully apparent after 1 week.
STONE SHINE
The highest degree of silicone stone care.
Specially formed agent with silicone lacquer content.
The surfaces treated are made water-repellent and resistant to U.V. rays. This agent gives the surfaces treated, a bright "watery light" effect.
It can be applied to in two layers at least, by brushes or sprayers. To reach a desirable effect, the treatment can be repeated several times.
Warning: The product contains solvent, therefore it can be used only in those closed rooms, which are intensively vented.
Using this product, the vapor permeability of the surface will be significantly reduced or it may even disappear!
Recommended application area: public walls, counters, decorative surfaces.
STONE WAX
A waxy stone treatment agent.
STONE WAX gives the treated stone surfaces a beautiful waxy light and at the same time and thanks to its tripple effects, the surfaces remain washable, vapour-permeable, and water-repellent.
Patches of greas and oil, rests of placard, resp. contaminants caused by paints, can easily be removed with this agent from the surfaces by a HP washing device.
The agent has to be applied in two layers.
The system can withstand up to 16 washing cycles.
TERRACOTTA FLOWERPOT
For unglazed flowerpots.
TERRACOTTA FLOWERPOT has specially been developed for treatment of baked unglazed clay pottery, flowerpots, and cups.
Upon its action, pottery wares will not moulder its beauty will not be impaired through outgrowth of "salty flowers", and it will not freeze into crumbles in winter (In case that no water is kept in them.).
Besides the fact that flowerpots will not absorb any water, its network of pores and capability of passing through air, formed whilst the baking, which are necessary for the roots of plants, remains open.
Our pottery will be novel for years there will be no need in replacing them with plastic ware.
It is recommended to dip the clay pottery into the treating liquid for 2 minutes and so, through a uniform treatment, thus forming of stains can be prevented.
TOMBSTONE PROTECTOR
Ideal, highly effective impregnating agent to protect tombstones, burial vaults, monuments, and statues.
After cleaning the surface, the agent applied in two layers will prevent from growth of algae, moss, contamination, and damages by frost in winter seasons, for years.
Recommended for use on concrete, artificial stone, plastered surfaces, brick, stone, or (after testing) on marble.
Before successful treatment, if there is any contamination on the surface, the surface should be cleaned!
Important: The agent is not suitable for the treatment of objects made of gypsum.
Warning: Smoking and open flames are prohibited during usage!
UNIVERSAL
Highly effective impregnating agent.
The Highly effective impregnating agent UNIVERSAL is excellently applicable for treatment of mineral-based surfaces.
Thanks to its special active compound, the agent has an excellent penetration feature. Following its application to the surface, it's water-repelling capability will quickly be formed, and It can be applied even onto wet surfaces.
It can be applied on concrete, brickwork, plasters, clinkers, YTONG, bricks of sand-lime stone, artificial stones, and natural stones.
Important: This agent is not suitable for the treatment of objects made of gypsum.
Use a covering in order to avoid its contact with glass surfaces.
WALL ANTI-GRAFFITI
It makes easy to clean the wall surfaces from graffities and poster residues.
The dual system consists of silicone and a washable wax layer.
The triple feature of this dual system is that it's washable, water-repellent and breathable.
Whilst rinsing, the system would repell contaminated water.
Clean the contaminated surface with a cold water high pressure wash system (eg 100 bar).
After cleaning, there's NO need to apply the protective layer again.
The system can withstand up to 16 washing cycles.
WALL BRICK BALSAM
Suitable for colour-deepening and impregnating bricks and broken bricks.
The agent's active ingredient is the silicone resin, which significantly reduces the capillary water absorption capacity of the building material.
Its other active ingredient is silicone lacquer, which optically vitalises the surface's colour.
With its usage, the new brick doesn't fade, and the broken brick returns to its vibrant colour as if it were new.
With its application we can be prevented from saltpetre and salt efflorences.
Warning: The product contains solvent, therefore it can be used only in those closed rooms, which are intensively vented.
Smoking and open flames are prohibited during usage!
WALL BRICK PROTECTOR
The most ideal impregnating agent for bricks, whether it is new or broken.
If the bricks are fitted into grout or any other adhesives, then the surface should be treated following the drying-out binding of the adhesive, however, in that case if the bricks are put into sand (walk-on area), then they should be treated by dipping.
Warning: The agent may not be applied to clinker bricks!
On clinkers use our CLINKER PROTECTOR.
For chimney bricks UNIVERSAL is recommended.
WALL PRIMER
Silicone containing deep priming agent for mineral-based plastered surfaces or concrete surfaces.
After 24 hours from the treatment, any facade paint or wall paint may be applied onto the surface.
By using it we can prevent saltpetre and efflorescences.
Warning: on deep priming agent-treated surface you can not stick any covering material, it can be only painted!
WALL PROTECTOR
A plaster impregnating agent.
WALL PROTECTOR is recommended for application on raw plastering painted in mineral-based wall paints, or on substrates not painted.
After 24 to 48 hours following the treatment, the plastering will not take up any water it will repell water.
When using it, deposits of saltpetre and "flowers" of salts resp. freezing up in wintertime can be prevented from.
Important: Improper or damaged insulation cannot be refitted by this treatment the damages can be decreased at least !
The settlement is a joint application of a proper insulation and impregnation.
WALL SAND-LIME BRICK PROTECTOR STANDARD
It has been developed for indoor sand-lime brick surfaces which are very sensitive especially to water and other contaminants.
It's used to prevent surface from contamination, absorption of water, growth of algae, saltpetre, salt efflorescence.
After 12-24 hours the surface will no longer absorb water, it becomes water-repellent.
Treatment should be repeated every 4-5 years.
WALL SAND-LIME BRICK PROTECTOR PROFESSIONAL
It has been developed for outdoor sand-lime brick surfaces which are very sensitive especially to water and other contaminants.
It's used to prevent surface from contamination, absorption of water, growth of algae, saltpetre, salt efflorescence.
After 12-24 hours the surface will no longer absorb water, it becomes water-repellent.
