The product range of dry-cleaning® has been developed for the product range of aqua-stop w®.Before applying silicon, the surfaces to be treated, shall in the most cases thoroughly be cleaned.
This kind of cleaning when using conventional household detergents, is in many cases a hopeless activity. Each member of the dry-cleaning® product family possesses an extra active agent content and as a result, they can cope with the cleaning difficulties.
The product range of dry-cleaning® offers a settlement in the removal of the followlng things for example:
cement veils, oils, greases, scales, "flowers" of salts, mould, soot, algae, moss or even wall painting.
The product range of dry-cleaning® provides an inestimable aid to renew old contaminated surfaces in a wonderful way, however, it is inevitable in tidying up new buildings before their hand-over or followlng their refurbishment.
The product range of dry-cleaning® provides for an unprecedented aid in all of the corners of flats and houses in the every-day cleaning and tidying as well.
Our slogan says:
"There shall be bright cleanliness everywhere and all the time!"
|
|
 |
 |
BRICK CLEANER
Cement veil onto removing brick surfaces
Removes it indulgent cement got on the surface of the ashlar brick-, and wall joint residues.
The surface regains his natural colour after his application, his character, the veiled colour ceases, disappears the chinking substance colour change caused by.
Following a successful surface treatment, it is also recommended to impregnate the surface cleaned up, with one of our aqua-stop w® products (e. g. with WALL BRICK PROTECTOR).
|
| |
CEMENT DIRT REMOVER
CEMENT DIRT REMOVER can easily remove rest of cement, cement veil, and rests of mortar from the surface of acid-proof building materials (e. g.: acid-proof natural stones, clinker bricks, and ceramics). It effectively will remove deposits of rost and scale.
Warning:
It is not to be applied to surfaces of limestone, marble, crome-plated and other surfaces which are not acid-proof.
Before using the substance, always make a test cleaning at a less seeable point.
Following a successful surface treatment, it is also recommended to impregnate the surface cleaned up, with one of our aqua-stop w® products (e. g. with UNIVERSAL).
|
| |
DEGREASER
The DEGREASER grants a big help in removal of stubborn, hardly ever removable greasy / fatty contaminants. The agent will dissolve dried-on and burnt-on fatty contaminants from the surface.
It can be used for cleaning surface of stone grills, stoves, resp. metal, glass and stony surface. It is proper to clean up fireplace panes/glasses with potash, and tiled stoves, too.
Before applying the agent, always make a sampling test at a less visible point of the substrate!
Following a successful surface treatment, it is also recommended to impregnate the surface cleaned up, with one of our aqua-stop w® products (e. g. with STONE PROTECTOR MAX).
|
| |
GRAFFITI REMOVER
GRAFFITI REMOVER can remove wall paintings without any harm to the surfaces. It can be applied to painted plastering, stones, concrete and plastics as well.
This agent is environmentally friendly and will biologically decay.
Before using the substance, always make a test cleaning at a less seeable point.
Following a successful surface treatment, it is recommended to impregnate the surface cleaned up, with one of our aqua-stop w® products (e. g. with WALL ANTIGRAFFITI) as well.
|
| |
MOLD REMOVER
Thanks to its active agents, MOLD REMOVER cleans moulded surfaces highly effectively.
It is perfectly suitable to remove outdoor and indoor patches of mould.
Before using the agent, always make a test cleaning at a less seeable point.
Following a successful surface treatment and depending on the surface features, it is recommended to impregnate the cleaned-up surfaces with one of our aqua-stop w® products as well.
|
| |
MOSS and ALGAE REMOVER
The MOSS AND ALGAE REMOVER with its active chlorine content will clean highly effectively surfaces on which algae and moss has been grown out.
It is excellently suitable for cleansing of monuments, statues, tombstones and other outdoor artificial objects made of natural or artificial materials.
Before applying the afgent, always make a sampling test at a less visible point of the substrate!
Following a successful surface treatment, it is also recommended to impregnate the surface cleaned up, with one of our aqua-stop w® products (e. g. with TOMBSTONE PROTECTOR).
|
| |
NITRATE REMOVER
NITRATE REMOVER is a very effective cleaning agent which removes the saltpetre deposited on the surfaces of building materials.
It can be applied onto surfaces sensitive to acids, as well. When using it, the initial and natural colours resp. features of the surfaces treated, can be regained.
It removes cement veil from tiles or thin floor-tiled surfaces left behind following their pointing as well.
Before using the agent, always make a test cleaning at a less seeable point.
Following a successful surface treatment and depending on the surface features, it is recommended to impregnate the cleaned-up surfaces with one of our aqua-stop w® products (e. g. with WALL BRICK PROTECTOR)
|
| |
OIL STAIN REMOVER
OIL STAIN REMOVER is primely applicable to remove oil and grease stains. It can be used both by hands and by machines.
Before using the substance, always make a test cleaning at a less seeable point.
Following a successful surface treatment and depending on the surface features, it is also recommended to impregnate the surface cleaned up, with one of our aqua-stop w® products (e. g. with STONE PROTECTOR MAX).
Warning:
The agent is alkaline avoid any contact with your eyes!
|
| |
POINTING CLEANER
POINTING CLEANER is a special cleaning agent for contaminated, mildewed pointing. In using it, the points contaminated by then, will be renewed and regain their original colours.
Following a successful surface treatment or depending on whether a surfice is exposed to oily contamination or not, it is recommended to impregnate the surface cleaned up, with one of our aqua-stop w® products (e.g. POINTING PROTECTOR MAX or, or with our aqua-stop w® POINTING PROTECTOR product.
Impregnation will to a high extent prevent a subsequent contamination.
|
| |
SMOKE & SOOT REMOVER
The SMOKE & SOOT REMOVER is a highly effective water-based cleaner.
Contaminants accumulated and deposited due to the road traffic, can easily be removed with no scrubbing or brushing from concrete fences, concrete walls, stone fences, profiles of parapets.
It is also suitable for cleansing of stone grills in gardens.
Products packaged in larger volumes, can also be processed by applying machines.
Before applying the agent, always make a sampling test at a less visible point of the substrate!
Following a successful surface treatment, it is also recommended to impregnate the surface cleaned up, with one of our aqua-stop w® products (e. g. with UNIVERSAL).
|
| |
TOMBSTONE CLEANER
A cleaner for cleaning tombstones and monuments
(with no acidic agents)
Using TOMBSTONE CLEANER, you can clean up the tombstones of your dearests, monuments, and statues.
It frees the surfaces from moss. algae, contaminants, resp. cease becoming grey colour.
It can be applied to concrete, marble, artificial stones, granite, marble, and limestone.
If needed, the treatment shall be carried out several times.
Before using the agent, always make a test cleaning at a less seeable point.
Following a successful surface treatment, it is also recommended to impregnate the surface cleaned up, with one of our aqua-stop w® products (e. g. with TOMBSTONE PROTECTOR).
|
|
|
|
|
